RR_Banner.gif (14795 bytes)
Customer comment:

Thanks for your help over
the telephone. I'm very
happy with everything.
Purchase now!

Home

Patches

To download a patch, click on its corresponding link.  The patches require a previous installation of The ITEMIZER version 6 or 7.  Once downloaded, run the patch as if it were a regular installation program.  Be sure that you install the patch to the same directory that contains your current Itemizer installation.  If you accepted the default installation path before, then simply accept the default path for the patch.

Version 6.01 - updated 8/15/00 - Extra-wide sheets are now scaled properly when printing.
it601.exe (198 KB)

Version 6.02 - updated 12/22/00 - Layouts can now be generated immediately after auto-grouping, without the need to individually review each group. Requires previous patch to version 6.01.
it602.exe (208 KB)

Version 7.01 - updated 11/28/03 - (1) Pieces having duplicate dimensions retain their description fields after manual rearrangement. (2) Kerf for DXF layouts is accounted for properly. (3) Support of updated KCDw import format: inch, cm, or mm. (4) Help option included on main menu. - The 7.02 patch includes 7.01 updates.

Version 7.02 - updated 3/14/05 - Includes 7.01 patch. - (1) Trim dimensions calculated correctly when one Trim is specified. (2) Eliminated Description fields overlapping on printed output. Font size must be adjusted so all Descriptions fit on one line. (3) Eliminated multiple quote marks around filename when saving job. (4) Eliminated the need to double strike to get initial capital letter in Description fields.
it702.exe (354 KB)

 

Vista users:  A number of problems have surfaced for some users of the Vista operating system. This includes crashing when using the Multi-view option, the numeric keypad shutting off after each entry and a reverse image of the input spreadsheets. Some of these problems have been overcome by running The Itemizer in a compatibility mode such as Windows 98.

To run in a Compatibility mode:
Right click on program or program's icon, select Properties/Compatibility and check the Compatibility mode check box and select a mode. Then click Apply and run program. More detailed instructions can be found at: http://support.microsoft.com:80/kb/927386